1. Function Summary: Securely positions the release bearing, ensuring smooth engagement and disengagement of the clutch, thus prolonging its service life.
2. Structural Composition: Comprised of the release bearing carrier, release fork, and other components, interconnected via circlips, to facilitate the movement of the pressure plate.
3. Working Principle: Employs a return spring to maintain a clearance between the bearing shoulder and the release fork. The force applied through the pedal moves the bearing, thereby engaging or disengaging the clutch.
4. Durability: Constructed with high-quality materials and a well-designed structure, it typically boasts a lifespan of over three years, albeit influenced by driving habits.
5. Maintenance Essentials: Regularly check for lubrication, maintain cleanliness, adjust the levelness of the release lever, and ensure that the free play is appropriate.
6. Failure Symptoms: Audible noises, difficulty in starting, or slipping of the clutch can indicate wear or poor fitting, suggesting potential malfunctions.
7. Replacement Timing: Consider replacing after approximately 100,000 kilometers of driving or upon the discovery of abnormal wear.
8. Impact on Performance: Directly influences the smoothness of vehicle startup and gear shifting, crucial for ensuring driving safety and comfort.
Item No :
A0032502115Type :
TruckProduct Name :
Clutch release bearing seatProduct Origin :
ChinaTruck Model :
Benz 4143Packaging Details :
1. Standard export packing 2. According to clients request. 3.Neutral PackingLead Time :
To be negotiatedClutch release bearing seat
The clutch, being a crucial element in a vehicle's transmission system, relies heavily on the condition of its release bearing and carrier assembly for optimal performance and longevity. To ensure smooth clutch operation, enhance driving safety, and improve ride comfort, it is imperative to conduct regular maintenance and upkeep of the clutch release bearing and carrier assembly. Below are the detailed maintenance points, encompassing multiple aspects:
1. Regular Cleaning and Lubrication
Cleaning: Regularly inspect and clean the area surrounding the clutch, removing dust, oil stains, and other impurities to prevent contamination from entering the clutch interior and affecting the normal functioning of its components.
Lubrication: For parts requiring lubrication, such as the release bearing, apply an appropriate amount of lubricating oil or grease at regular intervals to reduce friction and extend component lifespan. Choose lubrication products suitable for the clutch system and adhere to the manufacturer's recommended lubrication schedule.
2. Lubricating the Release Fingers and Bearing Cover
Ensure the contact surfaces between the release fingers and bearing cover are adequately lubricated to minimize wear and noise. During maintenance, carefully inspect the lubrication status of these areas and replenish or replace the lubricant as needed.
Pay attention to the type and amount of lubricant used, as both excess and insufficient lubrication can adversely affect clutch performance.
3. Checking and Adjusting Clearances
The clearances between various clutch components are critical for proper operation. During maintenance, inspect whether the clearances between the release bearing, release fork, and release fingers meet the specified requirements.
If excessive or insufficient clearances are found, adjust them promptly. Excessive clearances may lead to incomplete clutch disengagement, while insufficient clearances may increase friction and wear between components.
4. Replacing Worn Components
As the clutch release bearing and carrier assembly ages, some components (such as the release bearing and release fingers) may exhibit wear. During maintenance, thoroughly inspect these components for signs of wear.
If components are severely worn or have reached their replacement threshold, promptly replace them. Using worn components can compromise clutch performance and potentially damage other vehicle components.
5. Adjusting the Operating Mechanism
The adjustment of the clutch operating mechanism (e.g., clutch pedal, clutch cable) is equally essential for smooth clutch operation. During maintenance, check the flexibility and reliability of the operating mechanism and make adjustments as necessary.
For hydraulic clutch systems, specifically inspect the quantity and quality of hydraulic oil, ensuring they meet requirements and promptly replenish or replace the oil as needed.
FAQ
Q: Can you do OEM?
A: Yes, we can do OEM/ODM as you required.
Q: Can you offer the technical support, online or site training or other
A:We will offer technical support like operating manual, operating videos to support or provided training material of the detailed products you are interested in.
Q: May I have a free sample? I need test your quality first.
A: We are regret to tell you that we could not offer free sample to our customers, which is our company rule. But if you agree, we can quote special price to better support you for trail order.
Hot Tags :
WhatsApp : +86 15060839695
WhatsApp : +86 19396061127
Email : deyauncindywu@gmail.com
Email : deyuanywyi@dyqp.cn
Tel : +86 15060839695
Tel : +86 19396061127
